Daisy Dam Covers are made in any size islands from 5.24m x 5.24m so that you can put the covers on and off the dam much easier.
Made from robust 600um material the Daisy Dam Covers are robust, but you must still be careful about anything sharp underneath the covers. A simple process makes it easy for any property owner to install: unfold, set up, tether together (if you wish) and then pull into place on the dam surface.
All Covers come fitted with special edging (wind-skirting) to pull all side of the cover just underwater so that wind can’t lift the covers off the dam.
Dam Covers can be made in almost any size or configuration, contact Daisy with dam size to get the best advice.
A recent customer has since had to order MORE Daisy Dam Covers and sent in the following feedback:
We are very happy with the tank covers. They were so easy to install and are working well. We haven’t had to cut any holes in the covers to allow the water flow into the tanks and the water seems to run off and the cover stays afloat. They are working very well and certainly clearing all of the slime and algae out of our tanks. We have had great success with your covers, and have spread the word about these Dam Covers to other graziers!
Click here to view a recent installation of a Daisy Dam Cover.
*based on 6.4mm per day mean evaporation rate
**based on NSW Department of Primary Industries July 2014 Water Requirements for sheep and cattle primefact sheet
^ ASTM E96-2005 Water Vapour Transmission – Water Method Test
5.24 x 5.24m
(Saving 175L* water per day, saving water for 50 sheep per day or 2.9 cattle per day**)
5.24 x 10m
(Saving 335L* per water day = saving water for 95 sheep per day or 5.5 cattle per day**)
5.24 x 20m
(Saving per 670L* water per day = saving water for 191 sheep per day or 11.1 cattle per day**)
5.24 x 30m
(Saving 1006L* water per day = saving water for 287 sheep per day or 16.7 cattle per day**)
Or fill in the contact form and we can organise a quote for a custom made Daisy Dam Cover at any size.